خدماتنا
تصمم BEPCO وتهندس وتبني منشآت من الخرسانة ذات الشد اللاحق لجميع أنواع المشاريع — المباني، البنية التحتية، المنشآت الهيدروليكية وإعادة التأهيل الإنشائي.
Thinner floors, longer spans, no beam drops.
Our post-tensioned slabs replace traditional reinforced concrete for car parks, offices, hotels and residences. The savings are measurable from the design stage: less steel, less concrete, less formwork, open floor plates.
سماكة مخفضة
18-26 cm بدلًا من 23-33 cm في الخرسانة المسلحة — 20 إلى 30% خرسانة أقل في كل مستوى.
أسقف مسطحة
بدون هبوط عوارض: حرية معمارية كاملة للتقسيم والخدمات.
فك سريع للقوالب
3 إلى 5 أيام مقابل 21 يومًا في الخرسانة المسلحة. تُقسَّم دورة البناء على أربعة.
توفيرات إجمالية
توفير 20 إلى 35% على التكلفة الإنشائية من خلال تقليل المواد واختصار الجدول الزمني.
Span 15 to 30 metres with no intermediate support.
Post-tensioning enables large clear spans for halls, atriums and structures where open space matters. Precast or cast-in-place beams, sized precisely for your programme.
بحور 15-30 m
بحور صافية مستحيلة في الخرسانة المسلحة التقليدية، دون أعمدة وسيطة.
مقاطع عرضية محسّنة
عمق العارضة مخفّض بنسبة 25-35% مقارنة بالخرسانة المسلحة، مما يحرر الارتفاع المفيد.
أعمدة أقل
مساحة مفتوحة أكبر وعوائد أفضل لمواقف السيارات والمناطق التجارية.
توفير في المواد
فولاذ أقل بنسبة 30-40% وخرسانة أقل بنسبة 15-25% مقارنة بالخرسانة المسلحة التقليدية.
Crack-free industrial floors with far fewer joints.
For warehouses, factories and logistics platforms, post-tensioned ground slabs drastically reduce the number of joints, eliminate cracking and extend service life under heavy traffic.
تشقق أقل بنسبة 80%
الانضغاط الدائم يعاكس انكماش الخرسانة ويمنع تكوّن الشقوق.
فواصل متباعدة (40-60 m)
بدلًا من 5-6 m في الخرسانة المسلحة، مما يقلل نقاط الضعف والصيانة بشكل جذري.
استواء متفوق
تفاوتات FL/FM تُحافَظ عليها بمرور الوقت، حتى تحت الأحمال المتدحرجة الثقيلة.
عمر خدمة ممتد
توفير 25-35% في تكاليف الصيانة على مدى 20 عامًا مقارنة بالبلاطات التقليدية.
Watertightness through concrete compression, no membrane.
Circumferential prestressing compresses the concrete against the pressure of the stored fluid. The result: lasting watertightness, minimal maintenance and zero cracking — for drinking water, effluents and industrial products.
إحكام بدون غشاء
الخرسانة المضغوطة محكمة جوهريًا — لا يوجد غشاء PVC مكلف لاستبداله.
عمر خدمة > 50 سنة
لا حاجة إلى أي تدخل للعزل المائي طوال حياة المنشأ بأكملها.
الامتثال للمعايير
EN 1992-3 و ACI 350 تُستوفى تلقائيًا بحالة الانضغاط الدائم.
جدران أرفع
سماكة أقل بنسبة 20-25%، مما يقلل حجم الخرسانة وأحمال الأساسات.
From simple beams to precast segmental decks.
We support designers on every civil engineering structure: prestressed beams, deck slabs, cast-in-place or precast segments, and external prestressing for strengthening.
بحور 50-200 m
الإنشاء بالكوابيل المتوازنة أو البناء المجزأ لأكثر العبورات طموحًا.
ركائز أقل
تخفيض 50-70% في الأساسات العميقة — التوفير الأكثر أهمية.
عمر خدمة 100+ سنة
خرسانة مضغوطة وكابلات محمية لمتانة استثنائية.
إنشاء بدون شدات
تسمح طرق الكوابيل والبناء المجزأ بالبناء فوق الماء أو حركة المرور الحية.
Diagnose, assess and rehabilitate existing structures.
Our engineers get involved early to guide span, thickness and system choices, or to diagnose an existing structure. Bringing in a post-tension specialist saves 15 to 30% of the structural cost.
تشخيص شامل
معاينة بصرية، اختبارات غير متلفة، استخراج بالحفر، وتحليل وفق الكودات في 4 مراحل.
خبرة الشد اللاحق
قدرة نادرة في إفريقيا: تشخيص متخصص لكابلات الإجهاد المسبق والمراسي والقنوات.
توصيات مُقدَّرة الكلفة
تقرير مفصل مع حلول تدعيم ذات أولوية وتقديرات الميزانية.
جميع أنواع المنشآت
خرسانة مسلحة، خرسانة سابقة الإجهاد، ومركّبة — مبانٍ، جسور، خزانات، ومنشآت هندسة مدنية.
From sketch to handover, a five-step process.
Every project follows the same path, with a dedicated BEPCO project manager and regular reporting.
Study & quote
Drawing review, preliminary sizing and a quote within 48 hours.
Detailed design
Eurocode 2 calculations, execution drawings and material schedules.
Supply
Strands, anchorages, ducts and jacks delivered to site within 72 hours.
Stressing
Carried out by our certified crew, with a stressing record per cable.
Handover & follow-up
Grouting, testing, as-built documentation and a ten-year warranty.
The answers our clients ask for most.
At what project size does post-tensioning become worthwhile?
From around 800 m² of floor or a 25 m span. Below that, conventional reinforced concrete is often more economical. Our engineers tell you honestly during the preliminary study.
Do you work with our design offices and contractors, or as a main contractor?
Both. We work as a separate prestressing package, specialist subcontractor or joint contractor. 85% of our sites are delivered alongside a local main contractor.
What are your mobilisation times on site?
48 hours for a quote, 10 days for execution drawings, 72 hours for material delivery. Our technical team can be mobilised within a week in every country where we operate.
Are the systems and materials you use certified?
Yes. Our strands, anchorages and systems are certified to European standards (ETA, EN 445/447) and compliant with the Eurocodes. We work with the leading global system suppliers.
Do you provide a warranty on post-tension structures?
A ten-year warranty on the works, and a 50-year system warranty on materials under normal exposure conditions. A preventive maintenance plan is provided at handover.
Can you train our in-house teams in post-tensioning?
Yes — we regularly run sessions for design offices, owners and local contractors. One to three days, in French or English, on site or at our offices.
لديك مشروع في ذهنك؟ لنتحدث.
أرسل لنا مخططاتك واحصل على دراسة جدوى مجانية خلال 48 ساعة. سيقترح مهندسونا حل الشد اللاحق الأنسب لميزانيتك وقيودك.